Configuring camera detection zones in the Cloud Portal

Follow these steps to configure detection zones for your cameras in the Secury360 Cloud Portal:

1. Open the camera settings

   • In the Cloud Portal, navigate to the camera you want to configure.
   • Click on the camera settings to access the configuration options.

2. Draw the detection zone

   • To define the area where detection should take place, use the detection zone markers:
     • Left-click on the camera feed to place the markers for the detection zone.
     • Click within the detection zone to add additional markers and adjust the shape.
     • Right-click within the detection zone to assign it to another partition if needed.

3. Add more detection zones

   • If you need more zones, click the ‘Add group’ button to create another detection area.
   • This feature allows you to define multiple areas of interest within the camera feed for more granular detection.

4. Save your changes

   • After configuring the detection zones, make sure to save your settings.

By setting up these zones, you ensure that the camera will focus detection only on the relevant areas, improving the efficiency and accuracy of your security system.