Instructions for connecting the S360 box to your network and devices, ensuring seamless integration and reliable operation.
1. Connecting cables
First, plug in the following cables:
- Internet access cable
- Camera network access cable
- DC power supply
The S360 Box can operate in standalone mode or be connected to an alarm panel for integration. Note that a combination of both is not possible. By default, the box is set to standalone mode.
2. Switching to alarm panel mode
If you wish to connect the S360 box to an alarm panel, follow these steps:
- Step 1: Attach the alarm panel’s alarm input to the S360 box output 1 (COM and NC) on Alarm Output 1.
- Step 2: Attach the alarm panel’s output to the S360 box input 1 (Zone 1 Input).
- Step 3: Disable the standalone function in the S360 box settings via the Cloud Portal:
- Go to General
- Set Standalone to No
3. Configuring zones
You can configure different zones by connecting additional outputs and inputs. For more detailed instructions on configuration, refer to the Configuration section.
