The Cloud Portal
      Back to home
      1. Secury360 Knowledge Base
      2. The Cloud Portal

      S360 box settings

      Click on Settings to open a new window where you can manage the S360 box’s configurations.

      General settings

      • Manage general settings for the S360 box.
      • When Standalone is enabled, the S360 box can be armed or disarmed using the mobile app or according to a time schedule.

      Licensing and subscription

      • On the Licensing page, choose your preferred subscription model and set your fair use preference.
      • Your subscription choice will affect AI accuracy, while the fair use preference influences your billing.
      • Be sure to review all options carefully.

      Detection trigger

      • Select whether the Edge AI or Camera AI is used as the detection trigger.

      Connection type

      • Choose the type of connection for the S360 box: broadband or external 3G/4G/5G.

      Partition and alarm configuration

      • Configure partitions, set alarm delays, and define durations.
      • Route a partition to the desired output of the S360 box.
      • You can assign cameras to different partitions and use zones for setting different partitions within a single camera view, as well as setting an alarm trigger duration.

      Alarm panel configuration

      • The outputs for connecting to an alarm panel are fixed and depend on the number of partitions in use.
      • Configure the remaining outputs by selecting an output action.
      • Inputs 1, 2, and 3 are reserved for arming/disarming partitions.
      • Inputs 4, 5, and 6 are reserved for error inputs (e.g., sabotage detection from cameras).

      Error events

      • Set different error event types, such as blackout and scene change errors.

      Scheduling

      • Set a preferred schedule for the S360 box.
      • You can copy schedules to other days and set different schedules for each partition.

      Holidays and custom dates

      • Add official holidays to the schedule.
      • If custom dates are required, they can be configured as well.

      Network Optix (NX) VMS configuration

      • If you wish to use Network Optix VMS on the S360 box, configure the connection here.
      • For further instructions on NX configuration, see page 25.
      • After configuring NX locally, ensure you add the system to NX Cloud to access it remotely.